Snowboard press for sale

For non-commerical sales of materials, equipment, and resources related to ski/snowboard building

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
BbTahoe
Posts: 28
Joined: Thu Mar 06, 2008 10:06 am

Snowboard press for sale

Post by BbTahoe »

I need to sell this press in the next month. Make me an offer!

TF-1000 press seen here http://snowboardmaterials.com/pages/sno ... resses.htm ($2500 obo)
3 casettes: 152 cm, 158 cm, 160 cm ($300 ea)
Aluminum snowboard templates: 148, 152, 155, 157, 159, 161 cm all twin ($100 ea)
User avatar
Brazen
Posts: 841
Joined: Thu Nov 25, 2010 11:26 am
Location: San Bernardino, CA
Contact:

Post by Brazen »

Provided the site will handle it, let's SEE what you're talking about :)

i.e. pics
"86% of the time it works 100% of the time".
airhoag
Posts: 26
Joined: Mon Dec 05, 2005 11:06 am

Post by airhoag »

+1 for pics. I'd like to see the molds and templates.
BbTahoe
Posts: 28
Joined: Thu Mar 06, 2008 10:06 am

Post by BbTahoe »

I'm working on pics. All of these things are in storage 2 hours away. The templates are 1/4 inch aluminum shaped like the burton jussi (twin) in 156 and 159, and the smaller sizes are based on burton twins too.

The casettes are large aluminum sheets that you lay the board up in to hold it together while pressing.
BbTahoe
Posts: 28
Joined: Thu Mar 06, 2008 10:06 am

Post by BbTahoe »

Here's a pic of the press
Image
airhoag
Posts: 26
Joined: Mon Dec 05, 2005 11:06 am

Post by airhoag »

Any pictures of the cassettes?
BbTahoe
Posts: 28
Joined: Thu Mar 06, 2008 10:06 am

Post by BbTahoe »

The cassettes are rectangular sheets of aluminum 30 cm x 152 cm, 158 cm, and 160 cm. They are flat along the middle and bend up slightly at the ends to accommodate tip/tail.
spacewolf87
Posts: 1
Joined: Fri Aug 19, 2011 4:51 pm

Post by spacewolf87 »

Is the press still for sale
Post Reply