on bonding ptex sidewalls, and delams

For discussions related to the type of materials to build skis/snowboards and where to get them.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
doughboyshredder
Posts: 1354
Joined: Mon Sep 17, 2007 7:37 pm

Post by doughboyshredder »

redbull wrote:
doughboyshredder wrote:uot;]pourable urethane is one that I want to try. http://www.eagerplastics.com/ure.htm

pmc790 is a 90 durometer urethane which could be applied to the core along with a primer. Or possibly applied after pressing, by routing out a void to be filled with the urethane.
Doughboyshredder, did you experiment with urethane? This is of interest to me. Have you seen Ride Snowboards tech video: http://vimeo.com/2429346
I wonder if any treatment is needed for the use of urethane sidewalls? If so, what kind of treatment? Primer?
Not yet. There is a primer available for bonding urethane.
Top
Post Reply

Return to “Materials and Supplies”