Odering materials
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
Odering materials
Alrighty, so I'm getting close to ordering the materials. I can get the epoxy easily (friends at a marina), the wood I can get as well.
SO I'm left with the folowing:
1. What kind of base material should I order from durasurf?
2. Where do I get edges (I'm assuming you still have some you could sell me)
3. topsheet material?
4. fiberglass, should it be ordered on line or should I try to locate some locally?
5. should I order enough for just a few pairs, or would it save me a lot of money to buy enough for more then a few pairs?
also, how much does shipping typically cost for this?
SO I'm left with the folowing:
1. What kind of base material should I order from durasurf?
2. Where do I get edges (I'm assuming you still have some you could sell me)
3. topsheet material?
4. fiberglass, should it be ordered on line or should I try to locate some locally?
5. should I order enough for just a few pairs, or would it save me a lot of money to buy enough for more then a few pairs?
also, how much does shipping typically cost for this?
-Pat
So far I have used vendors listed on the links page that the Kams have provided. What a great resource!
I just received my Durasurf base material. They require a minimum order of 50 ft and sold me the color of my choice from thier remnant stock at the same price as black. Total was $70.46 including shipping. I chose ORANGE !.
I spoke to Linsey (male) at Snowboard Materials on Aug 12 & he was still waiting for an import shippment of 84" edge metal. He expected it soon, so it may be in stock now. I will be ordering some when they're in stock. I will also be purchasing a short snowboard base from him to build my son some skis with.
I sent some money to CMAX for binding inserts, but have not yet received the inserts. (only been a week, not worried yet) They don't process credit cards so I had to send a check. 150 inserts with the magnetic caps, plus some insert detection powder for just less than $50 including shipping.
I have not yet sourced the fiberglass. I need a little help there. The Kams list theirs as triaxial braided, yet i'm having trouble locating an actual braided product. A lot of what I find is just strand orriented mat with stiching. I have yet to talk to Revchem. If they have a glass product that sounds right, I will probably order glass and epoxy from the. WestSystems sounded like good stuff when I talked to them, but for ease of ordering, I will probably just go RevChem for both.
ABS sidewalls & topsheet will be purchased from plastic distributors locally.
Wood purchased locally.
Dampening Rubber is still a big mystery to me. I haven't spent much time looking but my first try at sourcing it through Macmasters was very unsuccessful. Nothing came up in dimentions thin enough for our purposes.
-Jed
I just received my Durasurf base material. They require a minimum order of 50 ft and sold me the color of my choice from thier remnant stock at the same price as black. Total was $70.46 including shipping. I chose ORANGE !.
I spoke to Linsey (male) at Snowboard Materials on Aug 12 & he was still waiting for an import shippment of 84" edge metal. He expected it soon, so it may be in stock now. I will be ordering some when they're in stock. I will also be purchasing a short snowboard base from him to build my son some skis with.
I sent some money to CMAX for binding inserts, but have not yet received the inserts. (only been a week, not worried yet) They don't process credit cards so I had to send a check. 150 inserts with the magnetic caps, plus some insert detection powder for just less than $50 including shipping.
I have not yet sourced the fiberglass. I need a little help there. The Kams list theirs as triaxial braided, yet i'm having trouble locating an actual braided product. A lot of what I find is just strand orriented mat with stiching. I have yet to talk to Revchem. If they have a glass product that sounds right, I will probably order glass and epoxy from the. WestSystems sounded like good stuff when I talked to them, but for ease of ordering, I will probably just go RevChem for both.
ABS sidewalls & topsheet will be purchased from plastic distributors locally.
Wood purchased locally.
Dampening Rubber is still a big mystery to me. I haven't spent much time looking but my first try at sourcing it through Macmasters was very unsuccessful. Nothing came up in dimentions thin enough for our purposes.
-Jed
that's how it seems to me. I've talked to the Durasurf guys and will be ordering some from them. The topsheet and sidewall i may order from them as well, as it's not to expensive. wood and epoxy will be bought locally.
fiberglass, rubber strips, and edges are still a mystery.
I have time though, I still have to finish up the hose and molds.
fiberglass, rubber strips, and edges are still a mystery.
I have time though, I still have to finish up the hose and molds.
-Pat
hose-man,
if you plan on ordering from Revchem here is the part numbers for the stuff I ordered:
#26CDB200 (last 2 digits are zero, zero) = Triaxial fiberglass. They require that you buy a minimum of 150lb of this stuff which should be about $465. It's a huge expense if you only plan on making a few skis. Or perhaps you can split the cost with someone else.
#80LM-2A = epoxy resin. $50. I've been using this stuff since the beginning and it works fine. I've recently switched over to QCM, however, because the prices are much cheaper and the company has dealt with Hammer, Ride, and other snowboard companies directly so I know the stuff works. Plus they're super friendly and really helpful with figuring out what you need.
#80LM-2B = epoxy hardener. $15.
if you plan on ordering from Revchem here is the part numbers for the stuff I ordered:
#26CDB200 (last 2 digits are zero, zero) = Triaxial fiberglass. They require that you buy a minimum of 150lb of this stuff which should be about $465. It's a huge expense if you only plan on making a few skis. Or perhaps you can split the cost with someone else.
#80LM-2A = epoxy resin. $50. I've been using this stuff since the beginning and it works fine. I've recently switched over to QCM, however, because the prices are much cheaper and the company has dealt with Hammer, Ride, and other snowboard companies directly so I know the stuff works. Plus they're super friendly and really helpful with figuring out what you need.
#80LM-2B = epoxy hardener. $15.
- Kam S Leang (aka Little Kam)
Hey Hose-manhose-man wrote:
I just received my Durasurf base material. They require a minimum order of 50 ft and sold me the color of my choice from thier remnant stock at the same price as black. Total was $70.46 including shipping. I chose ORANGE !.
When you say they require a minimum order of 50ft is that 50 square feet? Or do you mean 50ft linear feet by some standard width. Just trying to find out if they would be cheaper than snowboardmaterials. Thanks!