Hannes 17/18

Document your personal work here. Show photos, movies, and share your secrets.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
Hannes
Posts: 93
Joined: Wed Nov 09, 2011 2:20 am
Location: NRW, Germany

Hannes 17/18

Post by Hannes »

So I have been busy lately.
During the last winter I decided to built a powderski for telemarking. And a friend of mine got really hooked on moguls so we decided to give it a try and make a mogulski.

Image Image Image Image

The powderski has an ashcore, ABS sidewalls and tipsavers and snowboardinserts. The core is 2.5-11.5-2.5, layup:
Veneer
400g ud glas
300g biax carbon
50g glasfleece
core
50g glasfleece
300g biax carbon
400g ud glas
base, edge, vds

Dimensions:
187cm, 100cm running length, 54cm Tip, 33cm Tail, radius 30m, 139-126-130

The mogulski has no sidewalls since it is more like a prototype. The core is ash as well.
Veneer
120g ud flax
1150g triax glas
core
1150 triax glas
base, edge, vds

Dimensions:
175cm, 98-66-88, radius 22m

So last weekend I went to Winterberg, a small resort nearby which just opened. Of course I had to try the powderski on the groomers. Well, I made it turn. Eventually. This ski is not made to be moved on light blue beginnerslopes. After it got a bit steeper I felt this would be fun at some higher speed. This is to much of a ski for the Sauerland:-) Now I hope my wife sees my vital need to visit the alps as soon as possible.

There were just a few moguls in Winterberg and hell yes the mogulski is the toy I wanted. Very quick from edge to edge, agressive and fun.
User avatar
Akiwi
Posts: 370
Joined: Thu Jan 15, 2015 7:48 am
Location: Olching (Near Munich) Germany

Post by Akiwi »

They look pretty awesome!
I am nobody. Nobody's perfect, so I must be perfect.
Post Reply