Duce First Board.

[duce1nik]

I been following this forum reading and learning for over a year and finally decided to build my first board. I would like to thank this great forum and the people that contribute and help newbie like me.

Here the Core

Mess up 3 core and finally almost got it



I staple the tip spacer work great

[duce1nik]

gluing the edge



My adjustable Press


The press in Action( I press around 35-40 psi)



Fresh out of the press



Cutting and sanding


My sidewall router


The finally product
The graphic is from some site I found online. I use Chrismp method for the graphic.



I misaligned the binding insert. So I have to redrill the insert and now its ready to ride. Can't wait to test it

[chrismp]

nice one! glad my method of making graphics works so well for you!

[deepskis]

nice one! glad my method of making graphics works so well for you!

This got me interested. Link to this thread?

Great looking board duce1nik!

[chrismp]

I don't think i opened an extra thread for this. I print on a regular inkjet printer, seal the back of the graphic with a couple coats of white acrylic paint and after pressing I apply a couple coats of clear epoxy and polyurethane varnish.

[deepskis]

Aha, ok. Thanks!