Hi,
have the same problem at the moment... I put a damn damn lot of mold release on the hardboard, but it obviously got soaked in too deep. So when I will be in the workshop again I can do the same as you ;( Will cut them out with the saw first and then try my luck...
Infinity Customs
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 87
- Joined: Tue Dec 27, 2011 12:02 pm
-
- Posts: 87
- Joined: Tue Dec 27, 2011 12:02 pm