Page 6 of 6

Posted: Tue Apr 16, 2013 5:47 pm
by MontuckyMadman
Cassetts are flat layup. We do have acces to a sheet metal roller but not nessecary. Just aneal and press and cook a few times.

Posted: Tue Apr 16, 2013 9:12 pm
by falls
thanks MM

Posted: Sat Apr 20, 2013 10:17 pm
by falls
Got a bit done this weekend.
Image
Image
And first snow of the autumn last Thursday.
Image

Posted: Sun Jan 19, 2014 1:17 am
by falls
Finished up a pair that have been needing some tidying up. The veneer split. Didn't look so bad, but added some racing stripes to disguise it a bit.
Has been 40C+ here the last 5 days, so thinking colder thoughts!
178cm
124-74-110 or something like that. Maybe 16m radius. Hard to remember these things when you designed them several years ago.
Image
Image

Re: Crisp Customs 2011/12

Posted: Sat Dec 14, 2019 6:09 pm
by BRAND2102
Just wondering how did you do the multi color die cut. Do the 2 pieces have to be melted together or just taped before layup

Re: Crisp Customs 2011/12

Posted: Mon Dec 16, 2019 6:03 pm
by falls
Just make sure the two pieces align well (ie cut square and straight) and tape them together. I have used contact paper (for covering books - CLEAR) on the underside of the base (ie outside the ski). Peel off after pressing.
You can tape the seam internally too with fibreglass tape (plastering tape) if you want to.