What is that tool ?

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
ben_mtl
Posts: 583
Joined: Mon Mar 31, 2008 1:47 pm
Location: Sherbrooke, Quebec
Contact:

What is that tool ?

Post by ben_mtl »

Just saw that on Donek's facebook. was wondering what that tool is...
Anyone has an idea ?

Image
A bad day skiing is always better than a good one at work...
prospectsnow
Posts: 141
Joined: Sun May 02, 2010 8:21 pm
Location: Sacramento, Ca
Contact:

Post by prospectsnow »

That arm looks like it is a power feed usually used on table saws.
I think this is how they rabbet their sidewalls. Neversummer has a similar setup.
We have snowboard and kiteboard build kits!
https://prtahoe.com/collections/build-kits
User avatar
MontuckyMadman
Posts: 2395
Joined: Fri Jun 20, 2008 9:41 pm

Post by MontuckyMadman »

Lookes like belt sander crazy rigged for sanding and rabbetting...so sweet....drool...
sammer wrote: I'm still a tang on top guy.
gozaimaas
Posts: 663
Joined: Fri Feb 10, 2012 4:17 am
Location: Nagano Japan

Post by gozaimaas »

Definately a power feed.
It will have 3 rubber wheels inside it
User avatar
chrismp
Posts: 1443
Joined: Fri Feb 13, 2009 9:00 am
Location: Vienna, Austria

Post by chrismp »

I'm with prospect here. The arm on top is definitely a power feed and I guess they have a router under that table for rabbets.
Post Reply