Tried searching but I can't find a thread about making an edge bending out of a cheap tubing bender like this one:
I swear I've seen something like this before, but perhaps I'm going insane. Little help?[/img]
Interwebz help: edge bender thread
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 2337
- Joined: Tue Apr 07, 2009 3:26 pm
- Location: Western Mass, USA
- Contact:
Search on 'tube bender'
http://www.skibuilders.com/phpBB2/viewt ... ube+bender
I tried using that bender before. File a groove in the tool to hold the edge. Clamp or fasten the tool to a work table. Otherwsie it's kind of cumbersome.
http://www.skibuilders.com/phpBB2/viewt ... ube+bender
I tried using that bender before. File a groove in the tool to hold the edge. Clamp or fasten the tool to a work table. Otherwsie it's kind of cumbersome.
-
- Posts: 41
- Joined: Sun May 10, 2009 5:23 pm
Thanks. I thought I also saw one with the other type of tubing bender pictured above (or similar). Maybe not.
edited to add:
here http://boardcrafter.com/content/view/24/33/
edited to add:
here http://boardcrafter.com/content/view/24/33/
-
- Posts: 2337
- Joined: Tue Apr 07, 2009 3:26 pm
- Location: Western Mass, USA
- Contact: