heating a vacuum press

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

mikic1
Posts: 174
Joined: Tue Nov 15, 2011 11:51 am
Location: sweden

Re: heating a vacuum press

Post by mikic1 »

Just in case you need verified press component suppliers, I put all my suppliers in a list here,
https://www.junksupply.com/making-a-heated-press/

Cheers
Miki

Maufils
Posts: 3
Joined: Thu Sep 10, 2020 8:37 am

Re: heating a vacuum press

Post by Maufils »

mikic1 wrote:
Sat Sep 12, 2020 4:54 am
Just in case you need verified press component suppliers, I put all my suppliers in a list here,
https://www.junksupply.com/making-a-heated-press/

Cheers
Miki
Thanks for the info, will start without blanket for now and will upgrade later. Good knowledge post about base flattness and camber effects. Building Happy Monkey style too ;-)
Attachments
Under pressure.jpg
Under pressure.jpg (81.28 KiB) Viewed 158 times

Post Reply