Drag knife Add on for Fusion 360!!!!

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
User avatar
Posts: 1331
Joined: Fri Nov 09, 2007 4:16 pm
Location: The tin foil isle

Drag knife Add on for Fusion 360!!!!

Post by vinman » Fri Mar 29, 2019 2:21 am

I know some folks here use F360 for cad/cam. I’ve been working with a German software developer on this piece of software. F360 now has drag knife support!!

After several months of development and testing we have finished a drag knife add-on for Fusion 360. This add-on creates support for the use of drag knives. Users will now have the ability to generate drag knife specific tool paths from within Fusion 360 after installing the add- on.
Features include the ability to specify swivel height, blade offset and corner tolerance angle. The Drag Knife add-on also supports multiple depth passes. The drag knife add-on is compatible with both OSx and PC versions of Fusion 360.The add-on comes with comprehensive documentation as well as a video to assist users in their workflow.
The Drag Knife add on can be downloaded from the Fusion 360 App store.
It is recommended that users also download and install the free NC Viewer add-on from the Fusion 360 App Store or use the online version which can be found at https://ncviewer.com .
Fighting gravity on a daily basis

Post Reply