i use a razor blade, and usually make about 3-4 cuts checking with the edge after each one. i never try to do it in one move

so it is okay to flame treat the sublimated material from miller studio. i was going to post something about it because i was not totally sure

i have been having trouble keeping camber with bamboo as well

k i will switch the order, i was doing it with sand paper, should i be using my belt sander?

one of my skis is dellamming from the sidewall. the edge and vds stay together but the vds pulls away from the sidewall. i was wondering what you think might be causing this. i flame treated the side wall, and took some sand paper to the side wall to abrade it. is there anything you guys are doing t...

i would get the

1/16 DIN PID Temperature Controller (SSR control output)
$45.50

Model: SYL-2352

http://www.auberins.com/index.php?main_ ... 17f5659524

I am nearly out of side wall and have a couple of orders coming up, i called crown today and they said it was about 2-3 weeks out, so i was wondering if anyone has some. i could buy from you and then send you some when we get our big order from crown. i only need enough for 3-4 pairs but any will he...

thanks for the input i am waiting on some carbon from raka, when it arrives i will try pressing at 70 and see how it goes and let u all know

how much does it cost for 50 meters of 3mm tip fill just a ball park figure?

where can i get 3mm tip/tail fill?

I just spent about 3 hours in the garage to not get my PID controller programmed i hate it...i hate it....i hate it just wanted to vent

great ill do the next pair at 70 and see how it goes

I tend to follow the Bigger Hammer Theory for most things in my life. i.e. if 45psi is good 95 must be better. this theory has lead me astray before.

as for the rationale i designed everything to operate at 150psi so i figured 90 was good. do you know what the BIG BOYS press at?

i have been pressing at 95psi at 180 deg F. i was wondering if i am using to much pressure. we have experienced some delams, but i dont think they are related to preasure. i have noticed that most people on here press near 45psi, just wondering if i should be doing the same. also have any of you eve...

great ill deff keep the carbon outside of the fg