Search found 238 matches
- Sun Feb 13, 2011 1:23 am
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: nightmare adjustable camber press
- Replies: 13
- Views: 11371
- Mon Feb 07, 2011 1:09 am
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: Heat controller program
- Replies: 9
- Views: 3846
- Sat Feb 05, 2011 11:56 pm
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: Heat controller program
- Replies: 9
- Views: 3846
- Sat Feb 05, 2011 11:05 pm
- Forum: Ski/Snowboard Design and Layup
- Topic: Rocker/Camber Park Board
- Replies: 8
- Views: 3894
Really? That much? Thanks for the input. Maybe I'll try 6mm, see how that goes. My first effort wasn't far off with the 157 all mountain, I want this park board to be pretty flexy but with some good stiffness through the tip/tail for pop. The sidewalls are going to be Wandoo as well, much like my fi...
- Sat Feb 05, 2011 3:53 pm
- Forum: Ski/Snowboard Design and Layup
- Topic: Rocker/Camber Park Board
- Replies: 8
- Views: 3894
I've got 1.6mm tip/tail in my current 157 all mountain board, it's fine with 22oz glass. The primary reason I was looking to use that is I've got material here left over, so reduces cost. Having said that, I'm working these days so the cost is far less of an issue than it was last year. 22oz glass I...
- Sat Feb 05, 2011 12:48 am
- Forum: Ski/Snowboard Design and Layup
- Topic: Rocker/Camber Park Board
- Replies: 8
- Views: 3894
Rocker/Camber Park Board
Hey all, Been away for a while - had so much snowboard related work at the end of last year I got a bit sick of it all and needed a break. Back now, and going for a park board design this time. This is the current spec I'm working on: Centred twin design, 153cm 3mm rocker in the centre from 10mm eit...
- Thu Jan 06, 2011 5:01 pm
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: Cat Track - Alternate Design
- Replies: 9
- Views: 6646
- Tue Jan 04, 2011 3:55 am
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: Cat Track - Alternate Design
- Replies: 9
- Views: 6646
I'm with Dr. Delam - the reason for the cat track is to create even pressure distribution perpendicular to the length of the press - the hoses we use wouldn't distribute pressure evenly along the width of the press so we use a cat track. You need something very stiff widthways that will conform to t...
- Tue Jan 04, 2011 3:34 am
- Forum: Materials and Supplies
- Topic: VDS Damping Properties
- Replies: 13
- Views: 12504
- Tue Jan 04, 2011 3:30 am
- Forum: Materials and Supplies
- Topic: VDS Damping Properties
- Replies: 13
- Views: 12504
Re: VDS Damping Properties
Awesome. I love it when engineering data reinforces the laymans' consensus. Any details on torsional stiffness? Good work! Torsional stiffness was interesting. I laid the core up much the same as with the damped board, but with uni directional carbon fibre rather than VDS, and above the core rather...
- Tue Jan 04, 2011 3:21 am
- Forum: Materials and Supplies
- Topic: VDS Damping Properties
- Replies: 13
- Views: 12504
Sorry all, I've been absent a while again and haven't got back to you. what about a full layer of vds? what about sandwiching carbon fiber between the vds? A full layer of VDS would make a difference only because it increases the weight of the board, which by default increases the damping properties...
- Wed Dec 08, 2010 3:22 pm
- Forum: Journals: Log Your Ski Building Progress
- Topic: It begins...
- Replies: 62
- Views: 42362
Thanks mate. Not including the heat control, I would have spent around $3000 (Australian Dollars) on the press all up. However, I have access to a welder at home and I didn't pay for the MDF, uni supplied that for me. I also had a compressor already. This includes things you don't think about, like ...
- Wed Dec 08, 2010 3:12 pm
- Forum: Materials and Supplies
- Topic: VDS Damping Properties
- Replies: 13
- Views: 12504
VDS Damping Properties
It's been a couple months since I visited the forum - was flat out with uni until recently. This was part of my thesis with uni - I thought it could be of interest to some. Background My thesis was on torsional stiffness and vibration control in snowboards. I built two snowboards - a reference snowb...
- Thu Oct 07, 2010 2:55 pm
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: I can only cut once
- Replies: 25
- Views: 11682
Hi MadRussian, In an ideal world, one ski on top of the other should press and work out exactly the same, however I don't think this would be the case often. If you ever move to using heat, you need the temperatures to be exactly the same on both skis or you can get variations in camber, which inclu...
- Tue Oct 05, 2010 10:06 pm
- Forum: Ski/Snowboard Design and Layup
- Topic: Metal edges for freestyle ski: What kind of steel?
- Replies: 39
- Views: 16643
Yes slimewalls are polyurethane. I've got them on my DH2, I can't say I notice an enormous damping difference over ordinary sidewalls. As MM said, the issue isn't with finding damping materials, there are rubber and plastic suppliers everywhere. The issue is with finding bondable damping materials, ...