you should be fine specially which so much extra carbon fiber. iirc you using ash core that's a stiff wood to begin with.

if you into electronics and programming or like to play with that kind of stuff SSR and programmable controller is the only way to go. However several threads here about SSR overheat and crops out in worst possible time. If you don't... use paper and pen and timer every time you making skis/board an...

MM exactly. imo "how-to" should be considered as a guideline not the rule. Those who does not read board before starting probably didn't realize methods described in how-to have problems and those problems discussed elsewhere and the discussions spread all over the place. By doing so begin...

I'm all done. Never thought it gonna get this fast this ugly
honestly, I felt insulted for no particular reason . had to reply to set the record straight

that's all

now it starting to get ugly lol akiwi I disagree. Be dependent on somebody else is bad approach also nobody have to reply. once I waited 2 weeks on one very important matter for me and was no help. Had to figure out everything myself. No big deal is is what it is. you know they say "give the ma...

thx I was thinking about to do this bump myself. lol this time he got me going. But in one shot got insulted, told to f#$%# of, presented as a jerk and a$$ I don't get often lol I even told the guy about my signature and the reason that there. nothing. suggested to do research.... nothing suggesting...

my remark about problem is not intended to you. If you read the board you should know what it's about. There is no stupid questions and questions you asked me was not stupid and I never told you you're asking stupid questions. What I told you over six months ago and we'll repeated again right now......

Seriously, you guys need to start reading the forum more or use the search function. Most questions you ask will answer themselves when you find the right threads on here. Of course you can use the same aluminum sheets for different sizes as long as they don't have any kinks from previous pressings...

maybe just a picture but blanket looks lumpy and uneven

do you using heat? Try to repress. Maybe it helps to fix the problem if not what you have to lose? I remember someone mentioned done it.
My first pair I mistakenly shift cassette to the back too much and tales end up substantially higher, no big deal but it was 2 not 1

Did you saw this?

http://www.skibuilders.com/phpBB2/viewtopic.php?t=4952

motoman wrote:The 8210 is definitely better option but the price is twice higher.

if you have to varnish top sheet what's the point of using it?
I would suggest use the right stuff or don't use it all .... And save all that money.
Many people, myself included, don't using top sheet at all

no craigslist or eBay in Germany?

hope this rail system will work for you. Unfortunately it didn't work for me. Wonder what kind router bridge you built. Also I don't think MDF good choice for material to make vacuum table. I tried holes 1" apart like you at first and didn't find table create enough suction.... had to triple am...

probably not otherwise iggy already would have one. From the picture above CNC machine have to be BIG… Commercial kind. My thought if small CNC cannot be retrofitted build new machine on frame of existing planar probably better option compared to the building machine from scratch. ...replace bottom ...