Search found 423 matches
- Tue Feb 20, 2024 10:23 pm
- Forum: Ski/Snowboard Design and Layup
- Topic: Tape that can stay in laminate?
- Replies: 2
- Views: 3942
Re: Tape that can stay in laminate?
You can use a fiberglass mesh tape that is used for drywall/tile backer board but it does have some thickness to it so you will most likely see it in the laminate. It is not super sticky either so I don't really recommend that method.
- Fri Jan 12, 2024 11:20 pm
- Forum: Journals: Log Your Ski Building Progress
- Topic: Soul Skis
- Replies: 125
- Views: 137330
Re: Soul Skis
I love the skis you have been making, and I have three questions for you: 1. Do you use a single or multi layer wood core? Multi layer vertically laminated core. Strips are usually around 3/4" wide. 2. How thick are is the wood core? I like stiff even though I only weigh 145. I usually go 13 m...
- Thu Jan 04, 2024 3:18 am
- Forum: Journals: Log Your Ski Building Progress
- Topic: Soul Skis
- Replies: 125
- Views: 137330
Re: Soul Skis
https://i.imgur.com/vPb6TqW.jpg https://i.imgur.com/DA6yejx.jpg Tuning just got a little easier. The shitty snow conditions prompted me to make my idea a reality so I could use my base grinder for side edging. I had a friend weld a plate to the roller rod so I could use it as a fence. The roller re...
- Wed Oct 04, 2023 12:54 am
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: List of tools
- Replies: 2
- Views: 3856
Re: List of tools
Here's what I've got that works for me in a not so big garage: Miter Saw Table Saw Surface Planer Jigsaw/Saber Saw Router Drill/Driver Base Grinder Lots of bar clamps Spring Clamps Fabric Cutter Binding Jig Angle Grinder Whole bunch of ski tuning hand tools Everything I have gets set up and broken d...
- Sun Jun 04, 2023 1:50 am
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: Base Grinder User Manuals
- Replies: 13
- Views: 18080
Re: Base Grinder User Manuals
Try this link for the Grindrite ST600 manual.
- Wed May 31, 2023 9:54 pm
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: Base Grinder User Manuals
- Replies: 13
- Views: 18080
Re: Base Grinder User Manuals
I've got the ST600 manual somewhere but I think it is on an old computer or backup hard drive somewhere. I am transitioning computers and need to get everything back in order. I'll find it soon. I promise!
- Wed May 31, 2023 9:21 pm
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: Grindrite st600 belt tension question
- Replies: 4
- Views: 5083
Re: Grindrite st600 belt tension question
Tracking is the smaller knob on top although I can't get mine to track all that well. I just let it eventually
drift to one side or the other.
drift to one side or the other.
- Wed May 31, 2023 1:51 am
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: Grindrite st600 belt tension question
- Replies: 4
- Views: 5083
Re: Grindrite st600 belt tension question
https://drive.google.com/file/d/0B9C24_DPAwA8dVJRZ3pNa042WVB1TURYMVQ1cXlyc2JaXzU4/view?usp=sharing&resourcekey=0-wh-1yi9gwsGcHNH81C-AXA Crank the dial on the back where the hose is hanging counter clockwise until you feel the change in pressure. Once you do it you will be able to feel when to st...
- Wed Feb 09, 2022 4:26 am
- Forum: Ski/Snowboard Design and Layup
- Topic: thoughts on wood tip filler
- Replies: 3
- Views: 4652
Re: thoughts on wood tip filler
I just use regular staples that are in a paper stapler. I tried my pneumatic one once on some scrap core and it blew it apart. I use firm but slow pressure on the stapler and it works well. You just need to be precise on placement if your sidewalls are narrow to keep it outside the edge.
- Tue Feb 08, 2022 2:04 am
- Forum: Ski/Snowboard Design and Layup
- Topic: thoughts on wood tip filler
- Replies: 3
- Views: 4652
Re: thoughts on wood tip filler
It's definitely feasible. I have done it with some tails that didn't have that much curve. It's just a matter of getting your thickness to the right dimensions and not going too thick for the given tip radius. If you are doing veneers, you can go with more than one layer and also add layers of fiber...
- Fri Dec 17, 2021 10:48 pm
- Forum: Ski/Snowboard Design and Layup
- Topic: Epoxy sticking to base
- Replies: 6
- Views: 3494
Re: Epoxy sticking to base
You could probably get away with a mold release on the base but I wouldn't risk it. I did use some Contact shelf liner once but it took just as long to apply and cut as it does for me to grind the epoxy off. I also try to keep the excess epoxy to a minimum and also use spray adhesive on the base on ...
- Mon Nov 09, 2020 3:43 am
- Forum: Journals: Log Your Ski Building Progress
- Topic: Jonrezz’s Build Log
- Replies: 94
- Views: 57827
Re: Jonrezz’s Build Log
When attaching your edges, put both on at the same time. This will keep them under equal tension and symmetrical.
- Sun Nov 08, 2020 2:16 am
- Forum: Aprés Ski Building
- Topic: Scrap Ski Base Material
- Replies: 4
- Views: 6977
Scrap Ski Base Material
I used some scrap base material to shim a toilet today. I've also cut some out with a hole saw to make a low friction inner wear surface for my mountain bike chain guide. Anybody else come up with some creative uses for scrap material? Maybe after I finish my bathroom remodel I will actually be able...
- Thu Aug 13, 2020 2:29 am
- Forum: Ski/Snowboard Design and Layup
- Topic: Flex of Ski: Stiff or soft front
- Replies: 2
- Views: 2562
Re: Flex of Ski: Stiff or soft front
The only skis that I can recall that had softer tails were some of the older Salomon pow skis. The concept was that the tails would sink and allow the tips to rise and plane up. I personally didn't like them and thought they washed out in the tails. How are you measuring stiffness? Are you obtaining...
- Sun Jul 19, 2020 10:36 pm
- Forum: Yard Sale (non commercial)
- Topic: PNW Materials Giveaway
- Replies: 2
- Views: 6115
Re: PNW Materials Giveaway
Sorry to hear you aren't building any more but very cool of you to pass on the materials. I would take you up on that for sure if I was close by.