Did you use the carbon only as top layer for deco? Btw. you are a brave man to do this inside the kitchen (the first pair) and you seem to have a very tolerant girlfriend ;) Hi, no the main structure is from Bi-ax carbon fibre. This is the layup from the bottom up. Layup: Base + edge 320g Biax Carb...

So here is the 2018 model of The All, I call it the Carbon_Light. Same Basic shape as last year, (103mm under foot), but the composit construction is made using carbon fibre. And they are 183cm, and the 2017 model was 173cm. Layup: Base + edge 320g Biax Carbon Core - Made with the best baltic birch ...

I'm in Denmark (Aarhus) - One of the flattest places on earth.. the highest point in the county is 171m... So we have to go to Norway og the alps for snow.. I really like them! Being that I have not been skiing for that long I dont have that much to compare to. But they are by a long shot the most s...

That is very good to know, that 0.4mm will make a big difference.

Do you have some hints as to how much of the core would be "flat"? And do you make the core the full length of the board? I have seen this done on multible videos.
On skis the core is maybe ~ 70% of the length of the skis.

Try: www.junksupply.com
He is a nice guy.

Or
https://www.boardbuildingsupply.eu/shop/en/

Have not tried here before.

Thanks!

Just what i needed !

That does seem thin, but i guess the glass will make up for the strength

Hi, I know that this might have already been posted in some for on the forum, but I simply cant seem to find it.. I have build a pair of skis (photos coming in another post) where the lay up was like this: Base + edge 22oz (620g) Triax glass Core 22oz (620g) Triax glass 5cm wide 120g unidirectional ...

Here it is. Finally got the embedding working. https://image.ibb.co/feSMxR/y4mz_3_VPVxw_FTaj_ZV_HSDy_Agup5_Ap1z_MEH5_Mv_Kj_Mfkm_Gb_Fo_PA37_P4gaf_Kio3_Np_REl_Bq_YUpc_DOk3c_MGQ3_T6zbry1a_Z9b0_QC_3vs5_IRBaj_Zz_MCy8_R9v_EHaw0_OC2q_VJ7z_Nt_GP21m_BLt_Res_XDNAi_Ovz_RD4u9_Kv060_Cjme_Sn8_Nj_Zl_FQOQJfc_A3z02f...

Hi! In the summer of 2016 after my first two trips on ski, in the winter, i stumbled upon a video some one building skis, and I thought: I can do that to!! So after a lot of research and lurking on this forum, e.g. reading that the "only" vac pump to get was a Thomas 2660. And how to bend ...