Imho Georg from skibaumarkt offers also ready to shape cores

@vinman: Will try to rabbet the abs after profiling next time. Did replace the torn up parts and had to rabbet them again ... this was working without problems. So i see no disadvantage in rabbeting after profiling (maybe my router bit is pushing down good, its one with replaceable hss blades). Next...

First one done.. Small problems due to problem with resin, but quite happy with the result. Next days testing, then next protos. New cores already in work...

Btw. anyone using a 380V version (europe)? I wonder if these are 1 phase only or 2 / 3 phase (meaning 2 or 3 wire loops inside the mat).

I think etch foil makes only sense if you do more then 1 or 2. Then its cheaper and more consistent (from the layup) compared to the wired ones.

Cool, thanks. Will order as well. Did you use the silicon cable option? And would you recommend single or double ply?

@chrismp: did you get your ordered blankets already? happy with the quality?

Thanks, thought like that already

Didnt find anything about this. Is it necessary / better to rabbet the tipspacer as well if there is an edge?

Not easy with 2mm material

good idea, thanks!

@vineman: yes hotglue is the ticket, just pita to remove. you glue it full length (on the thin parts) or just drops every some cm?

@chrismp: its mr. hobel

So, i think its time to show some steps and findings ... All starts with a good shaper: goes on with planner crib (thanks forum!): Did use leftover wood for spacers, planned to full mm sizes and use 0.2 & 0.3mm steel spacers to get the sizes i need Tried to avoid edge pullout via couple of metho...

@mikic: Tred it out, somehow i always get an error when i try to put in my 30 measure points @twizz: Thanks a lot! I understand now (in theory) how to calculate the deflection of a beam ... to generate a diagram out of it should be easy. But where i drop out ... how to project this formular on a non...

Btw. we did put a new empty ink tank and a full one on a scale, it was more then 0.5kg difference.... 0.5kg ink just wasted ...

Maybe you can do something similar on the T3200:

http://www.ctphoto.com/9600_ink_bypass.html

I ordered some cartridges via ebay, its a chinese seller. Shipping was quick, but i assume it hangs at customs right now. I can tell you more when i receive the cartridges. Ordered some ink dampers too (think of ink filters), these can be blocked by supply ink. Good to have spares on hand (2-3$ / co...