twizzstyle Can you send me a photo of the normal tool and a photo that shows the modified tool? Thanks instead

Thank you I will try it like this. As for the bending? If I heat them to bend them by hand that will cause not a good bonding at the bended parts of the edges?

I just got my first materials yesterday and i saw and touch for the first time the steel edges like single material. The edges i got where not shinny were looking like they have grey colour. I made a full search in here about edges and sandblasting. Read at a post that you can get 3 types of steel e...

I have made a research about external gauges you can find for both presta and car type valves. As for the pump mine pump isnt compatible with presta valve i use and adaptor that has also an O-ring that makes it more sealable and you flow into presta with car pump. https://www.google.gr/search?q=adap...

Everything goes well i found the solution had to give 3cm space for the hose to get more and and to fill the hose with MUCH more air....

I have finally finished and planted my home portable press for one ski each time. The press was planned to build with maximum working pressure at 35 psi. Everything looked fine when sealing the hose using angles,screws,Teflon tape etc.I used the bicycle tire valve cause i couldn't afford an air comp...

I used 20x20 swedish pine for my catrack and in the pressing test looked like i wouldnt have any problems...

Planning to use poplar wood core profiled to 2.5-11-2.5 and a veneer topsheet sealed with marine varnish (maybe more than two hands) is that going to affect my core flex ? the veneer has 0.6mm thickness

what was the conclusion about the 0.1mm issue? I am about to order edges and base from this supplier will i have a problem after pressing with the base surface or so? please let me know... i think that the edge pocket is 1.4mm (cause they send me a mechanical drawing) not 1.3 and the base thickness ...

I am about to get involved in ski building and i have many dead ends in suppliers here in Greece. The only thing that i would like to find here is the epoxy resin so anyone can tell me which epoxy system should i use from this supplier ? because i'm a new user in this forum i cant post the link so i...