What would you suggest for virtual support? I was thinking of running a cable from through the outer I-beams in the center area

I just finished building this today! It is 78" in length and the inner rectangle section is 16" by 16". I got the I-beams from a metal scrap yard and welded everything together. (sorry for the crappy images, it was done by phone) http://i1069.photobucket.com/albums/u462/ElliL1/2012061...

I mismeasured the fire hose diamater; both bladders are 4" in diamater deflated. I am going to order another fire hose that is 4" in diamater from McMaster Carr. So I am going to end up using 3 bladders that are 4" in diamater across a 16" diameter press frame. I'm hoping this wi...

Thinking of ordering from McMaster Carr

I am planning on using a cat track. Are there any websites you would recommend where I could order a fire hose that is ~4.5" in diamater and approximately 7 feet long? I have been looking and it hard to find a website that sells be the foot.

Hello ski builders, I just picked up a fire hose long enough to go across the press twice. The bladder is only 4.5” in diameter without air. I have not inflated the fire hose yet not knowing its diameter with air. My press diameter is 15”. Will the bladder be large enough or would you suggest buying...

Whats up ski builders?

I'm planing on making skis this summer and super stoked to get started. My question is are there any instructions posted making a cat track for the ski press?

Thanks guys!