I’m interested in your big roll. Pm sent with my contact info, thanks!

After fighting UHMW sidewalls for the past year or two, I decided to throw in the towel and move on with my life. The UHMW was expensive, a pain to bond (both for core profiling and in the final product), created a pile of nasty plastic waste, put up a fight to achieve a nice finish on the tips and ...

This webpage has an interesting little writeup about using VDS rubber to enhance bonding to titanal. Might be worth a read.

http://www.snowboardmaterials.com/index ... ubber-foil

Have a bunch of ski length veneers for sale. Enough for about 38 pairs of skis, lots of cool grain and exotics. 300 takes the lot of them$ http://fairweatherskiworks.com/wp-content/uploads/2016/03/IMG_0799-e1459035754434.jpg # of veneers and species (same order as in photo from L to R) 8 Australian ...

I think most of the splitboard production companies are using pocketed base sheets, where the base/edge is recessed into the aluminum base sheet with a router. When the base material expands under heat in the press, it swells to fit the pocket and takes the perfect shape. In my experience, this base...

goners

20m isosport 8210 clear gloss topsheet material with protective tape for sale. I switched to a different material, $100.
email: grahamkraft@hotmail.com

Solid work. I truly admire the dedication to the hand pump. love it!

It was recently explained to me by a former engineer from K2 that the shoulder in the core is for more than just for base concavity. He said its essential for maintaining a correct resin/glass ratio. If you dont shoulder then all the pressure is on your edges making that part of the ski resin poor a...

THanks Isawsass. I'm in Haines.

I beams are way too expensive in ak and we'd rather work with wood than steel so here it is. http://i1258.photobucket.com/albums/ii529/grahamkraft/_MG_5460_zpsd6bdf701.jpg Beams are 20" wide laminated alternating 2x12s and plywood. Notched 8x8 timber supports reinforced with 3/4 inch allthread ...

If you dont want to use a topsheet, put a layer of fiberglass veil overtop of your rice paper graphics. Its protects your graphics and is lighter, cheaper, and you dont have to worry about topsheet delam.

Looking awesome!

Hey troublemaker, want to sell me a couple blankets? I'm nervous about messing with that much electricity

I use acrylic paint on rice paper. Put it on top of your upper composite layer and overlay with thin fiberglass veil.

great job on the bases