if you're interested i have quite a lot of Seartex 600g/sm triax. write me if you're interested in buying some. If you want bigger amounts (full roll i.e.) - no problem.

Hi, Does anyone have a comparison between those tho edge manufacturers? I have been using Metalldeutsch and it was ok, but I have the feeling that edges were rusting easily - on a ready made ski (not during the storage on shelf). I use standard CK60 edge, because for that the MOQ is low. I know that...

Another video from Nobile, Poland

Wow! Great - thanks Dtrain!
That looks very interesting - I'll contact them for sure!
Best!

Faction skis - also madein Poland (Nobile factory). I don't get one thing - he says that ski is made from balsa but they added some fiber to reinforce ski. He shows a blank core so the reinforcment is in the process of making core itself. I wonder what that is...Anyone? I also spoke year ago with on...

must be expensive for sure!:)
I want to make an upper edge for protection of veneer, and it must be stainless so stain doesn't get to/on veneer.

Hi!

I'm looking for the stainless steel edges to buy. Does anyone uses them and would like to sell me some?
I know I can order them in the factory, but the min. quantities are way to high for me and I would like to do some testings first.

Did anyone here uses them?
I'm in Europe.

Best!

has anyone used a Socrep topsheets? Do you know if they're worth anything? They have PBT and Duraclear, but they also have Soc Sery HARDCAP and SOFTCAP and PA materials. Is any of that nylon or UHMWE?

no way it will crack - I've made some tests with 1,5mm maple - it bends a lot, with no problem!
but anyway - good to know that most of you use the thin stuff - it would make it much easier as it's more choice in that thickness.

Wonderfull work! I've seen some of your skis last winter in shops in Italy
(Alta Badia I guess) - they are really beatifull!

I was wondering what thickness of veneer do you use 0,6mm, 1,5mm or different?
At the shops I found they have only few veneers 1,5mm and those 0,6mm are really thin...

I started doing that as well - super fast and more precise than glue gun f.e
also using 6mm staples

another video from the same factory. Unfortunately quality is poor

Hi,

A video from the polish factory Nobile (they make couple ski brands, they were producing for Burton as well)

Thanks Richuk and Jellyfish! - pull back of the depth of the rebate, you'll get a clean finish on the base what do you mean by that? what's the rebate? - exclude wood with knots, the bond is weak and or results in an over concentration of epoxy I'm taking only spruce with knots - as it's not "i...

What do you mean by cold cure? I use heated press and I cure in 65 C - it is the temperature that is recommended by the manufacturer. But the idea that dry core soaks some epoxy sounds resonable for me; however I don't know about the hairspray... About that I haven't wet the glass enough - last time...