Kan den här pumpen fungera??

http://www.jula.se/elektriska-pumpar-131319

Nån här som har kört med vacuumpressning? Tänkte ge mig på det och har lite frågor: Nån som vet var jag får tag på en vacuumpump i Sverige? Var får jag tag på plastfilmen? Och var får jag tag på nipplar och slangar?? Kan jag återanvända plastfilmen och går det att använda vanlig packtejp? Många fråg...

After some thinking i´ve changed my mind and will start using vacuumbagging istead of pneumatic press. So how the h#ll do I build a vacuumbagging system? I have the mold and I think I will use that. But all the other stuff, how do I get started? What do I need? And how do you build it? Somebody have...

Nån i Stockholmstrakten som har en planhyvel man kan komma och låna??

Ok thanks guys! Will try your tips! Anybody have a suggestion on my problem with too little curve on the tip? I don´t want to build a whole new mold. Is there anything you can do to change the curve angel of the mold or is there any chance of afterbend the tip?? Cause my tip defenitly need a bigger ...

Härligt härligt! Nån som köpt epoxi och glasfiber från kompositfabriken? Kikade lite på deras hemsidor och det verkar vara väldigt bra priser. Mycket billigare än Nils Malmgren som jag köpt av tidigare. Skulle vara intressant att veta hur deras grejer funkar. En annan grej: Har nyligen pressat mitt ...

I have a platform of around 25-30 cm. Skiis are 176 cm Ok, I´ll try to put some spare basematerial at the side of the base and make the core 3mm -12 - 3 mm. Do you think I should put some more glassfiber in aswell? My skiis are very light too. Only 1.2 kg! So I have some place left talking of weight...

I´ve made a mold and using water in my hose. So far so good... Here´s the set up Base Rubberstripes Glassfiber 22 oz triax Maplecore laminated (2mm - 10mm - 2mm) Glassfiber 22 oz triax Graphicdesign on ricepaper Top sheet Now to the problems. I made a pair of skiis, one at a time. What happens is th...

I´ve made a mold and using water in my hose. So far so good... Here´s the set up Base Rubberstripes Glassfiber 22 oz triax Maplecore laminated (2mm - 10mm - 2mm) Glassfiber 22 oz triax Graphicdesign on ricepaper Top sheet Now to the problems. I made a pair of skiis, one at a time. What happens is th...

Verkar vara en del byggare i Sverige. Tänkte att vi kanske kunde köra en svensk tråd där vi kanske kan köra lite tips, kränga grejer emellan oss och rekommendera svenska återförsäljare osv.

Nån som vill hänga på?

Hi.

Is it possible to use a color laserprinter to print on ricepaper or is it just Inkjet that works?

Hi all! I have som problems deciding how long the binding area of my skiis should be, and where I should place the binding area (forward from the center or backward). I´m using voilé Hardwire CRB binding. And also: How do I get these dimesions of the core in to Snocad-X?? I´ve tried to put in differ...

Hello all!

question: What side of the P-Tex should be facing down (towards the snow)?

Is there anybody in or near Sweden that have some material to sell,
such as:

Basematerial
Steeledges
Topsheet
Tipspacers