I ripped cnc cut leftovers on the table saw into long strips taped um next to one another and made a set of skis from them. Kinda labor intensive. Worked fine.
I have a big stack.

FS: about 9 meters of isosport 8200 gloss white nylon topsheet with fleece back 14" wide I got from miller a few years ago.
ALS0 included 95 yards clear medium-low tack application tape. 12" wide.

$160 shipped contius

Might want to call voile usa. They might buy it. Or roll off 10lb mini spools and sell those at a profit.

I looked at ramp at sia in 2015. They were trash. Not well made at all. Mediocre geometry and strange design choices. Ugly graphics. They didn't seem to have a clear path to 'their' target client base. They touted a bunch of 'green' tech that was all talk and no fact. On3p is the only potentially su...

Ha.
No want some materials but no action!

Check ur pms?

Yeah well toates fukered

"sidewall deepening technology"

Wtf?

Plasticpress where in the world are you located? Edit: i see Guatemala. How bout a mil base old fire hose? Buying used fire hose and having it shipped has got to be a better option. If the bladder fails while ur pressing you are out hundreds of $ in materials and tens of hours of your time. Don't re...

I tested a single 6 inch hose to 70 psi. Others pressed 2 and 3 bladder systems. No issues.
Yes the nylon stretches a bit but in the elasticity is where the strength is derived.

Have u fea modeled a tapered multi composite laminate structure to determine load/deflection and failure points? Aka have u designed a ski and tested it in a simulation? Do u know the harmonic frequencies associated with ski damping? Do u understand strength and stiffness weight ratios and janka har...

Did u try these people? U have to know exactly what u want to buy from them. http://www.diversifiedsilicone.net/index.html Hows bout these? http://sscrubber.com Http://www.rubbercal.com The chinese are the hungriest. U should hear from someone in 12 hours minimum if not try another. There all prolly...

I know u think I'm crazy but a super thin water based poly topcoat would seal and be porous to accept epoxy and good for bonding in all my tests. Cheap, quick and easy.

Micro balloons and carbon black are additives in toughened epoxies. Cotton chips sounds like it could increase viscosity and prevent penetration to the thick fiberglass tows used in the 22oz and heavier glass weaves. It's also not completely necessary. The quality of the newest epoxy coatings is ver...

Lamination is the destination.